FACTSHEET
2023 Post Show Report
Post Show Report
B2B Platform
About the Fair
Exhibitors
Visitors
News
Contact
ISK-SODEX SAUDI
Salon 4, Stand D20
Suitable for wall and duct installation. Effective filter surface area by their deep folding is larger than panel filter area. Dust particles penetrate deep into the folds; in this way filter give us high dust holding capacity at low air resistance.
The filters are used as pre- or main filter in: Operating theatres, hospitals and air conditioning applications (HVAC) Industrial processes like chemical, power generation, microelectronics, pharmaceutical, the food industry, optical, microbiology etc.
Washable prefilters to filtrate particles with diameters larger than 10μm mostly uses in residential, industrial, commercial HVAC systems and kitchen applications.
Washable prefilters to filtrate particles with diameters larger than 10μm mostly uses in in fancoil devices and simple ventilation systems,
Prefilters to filtrate particles with diameters larger than 10μm mostly uses in the simplest ventilation systems, fancoil appliances and air handling units.
V-Compact filters with high filtration area and low initial pressure drop are the most preferred filters in the second and/or third stage of the ventilation systems with the advantage of service life and low energy consumption.
Highly preferred filter model with the advantage of high filter surface area, low cost and service life in the case of ventilation systems with a wider filter installation area for the filters.
Preferred filter model especially in applications such as air handling units, suction grilles due to the requirement of less filter installation area compared to the similar models.
It is the preferred filter model with the construction advantages in the design phase depending on the characteristics of the process and the application, especially industrial applications and power plants.
HEPA Ceiling Filters designed for clean room ceilings and cleanroom work tables requiring high or very high levels of air purity to provide laminar flow.
Gel Type HEPA Ceiling Filters designed for "Excellent Sealing" clean room ceilings and cleanroom work tables requiring high or very high levels of air purity to provide laminar flow.
Protect personnel, equipment and process against airborne particles with larger filter surface area filter can be used in high airflows.
Filters with the most energy saving and long filter service life, which can be use for face velocities up to 3m/s (air volumes up to 4000m³/h) with the construction allowing maximum filter surface area usage.
Protect personnel, equipment and process against airborne particles with self-boxed and self-spigoted design.
Designed with more specialized filter media than standard HEPA filters for the special systems in supply and exhaust air systems in industry, clean room, medical and nuclear installations.
Preferred in high-risk environments with production technology that allows it to operate at high temperatures (maximum 260 ° C).
Activated Carbon V-Compact filters are the preferred filter model for odor filtering applications especially in commercial buildings with carbon-impregnated raw material which have a high filtration area and low starting pressure and low energy consumption advantage.
It is the preferred filter model especially for odor and corrosion control in industrial and commercial applications. In air handling units, such as filter cabinets, they usually work with filters used in particle filtering.
The best solution for adjusting the room pressures with an automation system is to reference atmospheric pressure, but the movements in the atmosphere due to wind will adversely affect our reference point and make room pressures irregular. The RC units used to eliminate this negativity have a resistance to wind motion (R) and a tube (C) to minimize...
Medical technology/ Pharmaceutics/ Microelectronics / Nanotechnology/ Micromechanics / Bio-engineering and Genetic engineering/ Laboratories/ Pharmaceutical Industry/ Automotive Industry/ Food and Beverage Industry and also suitable for all sterile applications.
These laminar flow cabins consist of prefilters, fans, HEPA filters (H13/H14), lighting fixtures, electric and automatic control systems, PVC curtains, wheels or parts for hanging from ceiling. Also, day/night set back energy savings, alarm feature for motor failure and emergency shut down available on request with AC control systems.
Laminar Flow Cabin with FFUs is made of special aluminum profiles and stainless steel frames. Cabins are either designed to be hanged from ceiling or comes with rolling wheels. Transparent hygenic curtains, variable speed controller, differential pressure gauges, test aerosol nozzles are some of the standard accessories. LF units achieve Class 100 ...
Mobile Laminar Flow Unit is made of stainless steel metal that is movable with its wheels. Units are designed for transferring sterile products under Class l 00 conditions according to U.S Federal Standard 209E or ISO Class 5 according to ISO 14644-1
Laminar Flow Units prevent operating zone from microbes, bacteria and other living organisms.
USCH can provide a filter change free of contamination. Each housing is equipped with a fully sealed bag (BIBO) system to protect of people, process and environment. Wide range of particule and chemical filters can be used in the in the unit .
Main demands of the clean room technology and especially in pharmaceutical applications are the air-conditioning and also accordingly the air quality. Air distribution is generally made through the HEPA filter installed to its housing. Therefore, selection and assembling the HEPA filter to its housing without leakage is very important.
Holding frames and installation rails help to install the filters easily and safely. During air conditioning sytems modification and renewal repairs, holding frames are easy way to secure a high quality filter connection. Different filter can be combined in a single frame without any problems. The clips have good resistance to alcohols, lyes and...
ULPATEK filter housing is made out of 1,5 mm thick sheet steel, either stainless or galvanized are gas tight welded. The filters are held in position by 4 corner brackets with screws, allowing simple and secure. Clamping of the filter unit against the housing seal face. As an option, this seal face may be equipped with a seal test groove. to DIN 19...
Automatic roll filter for coarse (gross) dust applications Automatic actuator control with differential pressure control. Easy install and maintenance. Filter change switch to BMS system. Supplied with high quality Ulpatek filter media. Energy efficient
It has been designed for operating room rooms considering high hygiene conditions. The metal part is made of Cr-Ni stainless steel or anticorrosive. Manufactured for suction ducts in hygienic environments
Industrial Dust Collection Systems are generally used for cleaner and safer working environments. Also, energy savings, production efficiency increases, product recoveries, air pollution controls which are other benefits. As the opposite of UVDC, UDC Systems are working on high airflow and low pressure values. Mostly offered with fan.
Industrial Vacuum Dust Collection Systems are generally used for cleaner and safer working environments. Also, energy savings, production efficiency increases, product recoveries, air pollution controls which are other benefits.
Wet filters are used for the dusts which cannot be filtered dry by cartridge or bag filters due to the physical and chemical properties. This filters are suitable for explosive atmospheres also.
Gas Scrubber Systems are the most common exhaust treatment systems used for the removal of combustion gases, process waste gases, vapors and other pollutants that are generated during the activities of various industrial productions. For the chemical, metallurgy, iron and steel, food, textile, paint, cosmetic, chemical storage, artificial leather, ...
Pipes and accessories specially designed for Industrial Dust Collection and Vacuum Dust Collection.
USCH can provide a filter change free of contamination. Each housing is equipped with a fully sealed bag (BIBO) system to protect of people, process and environment. Wide range of particule and chemical filters can be used in the in the unit . Special design is available depending on filtration stage and air volume. Test groove for leak testing of ...
In chemical, metallurgy, foundry, thermal processing, food, painting, textile, artificial leather and waste water treatment facilities generally produce VOC (volatile organic compounds), gas / vapor wastes and odor problems that can be solved best and sometimes only with thermal oxidizers.
Oil mist problems are generally formed due to machining and other processes that leads to the polluted exhaust air which contains oil mist. Oil mist filters are used for to protecting people, keeping clean the working environment and increasing the productivity.
Mobile Fair App
Online Visitor Registration
Participant Application Form
ISK-SODEX Factsheet
Would you like to get industry-related information faster?
