ECRH series Rooftop Packaged Air Handling Units can perform cooling or heating/cooling with the direct expansion refrigerant system and meet the fresh air needed by the occupied zone and perform all these operations in just one unit. Four ECRH works on roofs, terraces or other outdoor environments and provides conditioning of the air inside the occ...

Our air handling units are manufactured in 28 different sections. The flow rate range is 900-40,000 m³ / h in units for heating, cooling and ventilation, 1800-80,000 m³ / h in units intended for cooling only, and 2500-105,000 m³ / h in units intended for heating and ventilation. Our units are modular and have double-walled panel...

CFHR-Ceiling Type Counter Flow Heat Recovery Units are used in places that need fresh air such as restaurants, shops, historical buildings and offices. In spaces that are air-conditioned by heating or cooling, low-quality air-conditioned indoor air with high carbon dioxide and other harmful gases is created. While this air is exhausted, its heat lo...

HPGK-Heat Pump Heat Recovery Units are used to meet the fresh air load of the spaces. The unit heats or cools the air exhausted from the space and the fresh air that will enter into the space by means of a cross-flow heat exchanger. In cases where the amount of heat transfer is not sufficient, the heat pump is activated to close the temperature dif...

BGK-Heat Recovery Unit with By-Pass Damper are used in places where fresh air is needed such as homes, offices, hotels, business centers. In spaces that are air-conditioned by heating or cooling, low-quality air-conditioned indoor air with high carbon dioxide and other harmful gases is created. While this air is exhausted, its heat load provides co...

FHR-Floor Type Counter Flow Heat Recovery Units are used in places that need fresh air such as restaurants, shops, historical buildings and offices. In spaces that are air-conditioned by heating or cooling, low-quality air-conditioned indoor air with high carbon dioxide and other harmful gases is created. While this air is exhausted, its heat load ...

HOME-Residential Type Heat Recovery Units are used in homes that need fresh air. Thanks to the recovery of waste heat, it significantly reduces the energy consumed for heating and cooling needs of the house. It is possible to achieve an efficiency of up to 94% with a counter flow recuperator with polypropylene material. It works quietly with 25 mm ...

RTER-Rotary Type Energy Recovery Unit is used in places where fresh air is needed such as restaurants, shops, historical buildings, offices. It is designed to reduce the energy consumed in the air conditioning process of fresh air. It works together with indoor air conditioning devices. Return air coming from the indoor environment is discharged to...

POOL Pool Dehumidifiers are used to dehumidify indoor pools. If the partial pressure of the water vapor in the ambient air is lower than the saturation pressure, evaporation occurs on the pool water surface. As a result, the amount of moisture in the air increases to an undesirable level. In indoor swimming pools, the humidity rate should be betwee...

VGF - Prismatic Fire / Smoke Damper is used to isolate the other parts of the ventilation system from flame, smoke and heat in case of a fire. It has been subjected to 132 minutes Fire Resistance Test according to EN 1366-2: 2015 standard by “Applus + Laboratories”, which has ENAC (Spanish Accreditation Agency) accreditation. According ...

ACA – Rectangular Variable Air Volume Unit is used to control the air flow in special projects with comfort and hygiene requirements such as operating rooms, clean rooms, special processes. Variable air flow VAV systems provide energy savings of up to 50% in the energy consumed by the fan motor. It is used in variable air flow systems and duc...