ARMAŞ

Armaş FCV Alarm Check Valve is designed for wet applications where the water has no the danger of frost. The pressurized water which is inside of the pipe-line is discharged by sprinklers because of fire situation. When the discharged pressurized water system is supporting continuously, retard chamber is being full. Then, the pressure switch on th...

Armaş UL/FM Approved TD-Test and Drain Valve is a type of ball valve used in fire systems, especially for testing whether the system is working or not. It is installed on the system from the fire alarm valves to the sprinkler installation in the required zones. Tha ball used in the test and drain valve is rotatable via the stem by the lever a...

UL Listed Armaş “87-UL-QR” model Fire Pump Relief Valve is the safety control valve designed to protect system by releasing pressure surges to atmosphere quickly caused from sudden changes in water speed because fire pumps put into/out of service frequently in water network elevation lines. When network pressure goes beyond ...

It is a butterfly valve with supervisory switch for separating zones and operates such as a control valve on fire fighting systems. Monitoring is available with this valve and for positioning, it is provided handwheel on the rod connects with the gear box. It is possible to get info about the system to see on the valve’s body. The valve is ab...

Armaş Waterflow Detector converts the mechanical effect of the water flow into an electrical signal, when it detects the water flow. The electrical signal is transmitted to the fire panel and used to send information that there is a flow. The Waterflow Detector can be mounted horizontally or vertically.

OS&Y Valve is a type of gate valve which is able to follow the opening/closing position by moving the stem up&down movement, is able to follow electronically the movement by adding a monitoring key, and full open position does not disrupt the flow. OS&Y Valve generates low head loss according to butterfly valves. Valve is closed or open...

Armaş DCV dry alarm valve is the alarm valve used in the dry sprinkler system and controls the water flow. It is designed for use in areas with a high risk of frost, where the ambient temperature may drop below +4°C. Compressed air or nitrogen is kept on the valve against the danger of freezing. In the event that the pressure of these gases de...

Assembly direction of Armaş pendent sprinkler is downward. Pendent sprinkler distributes the water by expanding it downwards. Usage areas are slight and moderate hazard zones. Pendent sprinklers are suitable for use in house, hotel, hospital, mall, dormitory, trade center etc.

Assembly direction of Armaş sidewall sprinkler is horizontal. Sidewall sprinkler distributes the water by expanding it horizontal. Usage areas are slight and moderate hazard zones. Sidewall sprinklers are suitable for use in house, hotel, hospital, mall, dormitory, trade center etc.

Assembly direction of Armaş upright sprinkler is upward. Upright sprinkler distributes the water by expanding it upward. Usage areas are slight and moderate hazard zones. Upright sprinklers are suitable for use in house, hotel, hospital, mall, dormitory, trade center etc.

Armaş APS10 series pressure actuated switches are designed for the detection of water flow in automatic fire sprinkler systems such as wet pipe systems, dry pipe systems, pre-action or deluge systems. APS10 pressure switches are also suitable for providing a low pressure monitoring signal and adjustable set pressures between 4 and 20 psi.

Armaş “PR” model pressure reducer control valve is the hydraulic control valve which reduces high upstream pressure value into desired lower pressure value by means of built-in pressure reducing pilot valves. Pressure reducer control valve controls downstream pressure value continuously and maintains it constant without being affected ...

Armaş “77PA-EL-MR” electrically controlled, double interlock pre-action valve, designed for fire protection systems. The pre-action valve, actuated by the pressure of pipeline. Armaş Pre-Action Valve admits water into the sprinkler piping only when electric detecting device and a sprinkler have both been activated. The valve must be m...

Armaş “77PA-EL-PN-MR” electrically and pneumatically controlled, double interlock pre-action valve, designed for fire protection systems. Double interlock, electro-pneumatic pre-action valve actuated by the pressure of pipeline. Armaş double interlock, electro-pneumatic pre-action valve admits water into the sprinkler piping when both...

Armaş “77DE-EL-MR” electrically controlled deluge valve, designed for fire protection systems. The deluge valve, actuated by the pressure of pipeline. Armaş electrically controlled deluge valve is activated by a 3-way solenoid valve which actuates a latching relay valve to open the main. The valve must be manually reset after automati...

Armaş “77DE-PN-MR” pneumatically controlled deluge valve, designed for fire protection systems. The deluge valve, actuated by the pressure of pipeline. Armaş pneumatically controlled deluge valve is activated by a pneumatic relay valve which latches the main valve to open until manually reset. The valve must be manually reset after au...

Armaş “77DE-HRV-MR” is a hydraulically controlled anti-columning manual reset deluge valve, a hydraulic line pressure operated valve controlled by a pilot valve. The valve is normally closed. The valve opens itself when sprinkler of in the closed sprinkler line burst. Emergency release valve is available as standard.

Armaş Overground Fire Hydrants are designed and manufactured according TS EN 14384 standards and provide water to fire brigade crew at possible fire moment to treat rapidly. The hydrants are used in supplying water for fire brigade in factories, warehouses, industrial plants, around the buildings, fire sensitive forestlands and residential areas.
...

It is the hydrant of which watering outlets are under ground and cover ison the ground. It consists of stem which controls hydrant valve, spring check valve which makes automatic discharge service, cast pieces forming main body and hose connecting bonets. Opening-closing process is achieved by controlling stem with the help of hydrant key. Spring c...

Swing check valve permits that water passes toward flow direction and prevents water flow in counter direction. It is manufactured in such a way that it will be closed by its own weight or by a weight mechanism. It is used in especially pumping plants to prevent back flow in case pump becomes out of service. It may be used in hot and cold water pla...